Tuesday 23 October 2012

CloneZilla Windows Backup/Restore partition Tutorial added (Tut89)

Whilst discussing how to make a grub4dos menu.lst file show only one 'boot to Windows' option, a solution was posted by ndog37 on reboot.pro here for how to add CloneZilla to an existing Windows system. With this solution added, you can quickly backup your copy of Windows at any time and then later restore any of the previous Windows backup images. An XP backup takes approximately 5 minutes. Restoring an XP image takes approximately 1 to 5 minutes. The backup is made on the hard disk, so it is not suitable for off-line backups.

See YouTube vidoes here and here.

See also here for UEFI or here for MBR Tutorials.

You just need to add the files to your backup partition and then install grub4dos (I provide a script file in the download to do this with just one click) and then hide the files to protect them from accidental deletion (again using a script provided in just one click).
This makes it very quick to install onto any simple Windows PC or notebook (e.g. your grannies PC) so that they can quickly restore a working image if their Windows installation gets infected or becomes SNAFU'd.

Monday 22 October 2012

Avira Rescue, ImDisk and RockRidge!

Recently, I was asked to look at making Avira Rescue ISO boot from a bootable grub4dos USB drive (see Tutorial here). It turns out that most of the Avira Rescue iso's content actually needs to be in 'flat file' form (i.e. exist as files and folders on the USB drive) and so I needed to extract the contents of the iso file to the USB drive.

Now my favourite tool for this is ImDisk to mount the iso as a virtual drive volume and then copy over the files and folders that I think (guess!) that Avira might need. However, when I did this I found a problem - the resulting Avira linux boot pen did not fully boot to the Avira GUI desktop and stopped at ' Press Alt+F7 to return to the graphical User Interface '.



After much head-scratching, I found that the problem was caused by the case of the files. All of the files appeared in the ImDisk virtual drive as upper-case file names and folder names, yet when the Avira iso file contents were displayed by the 7Zip GUI, most of the files were lower-case. If I extracted all the files from the Avira ISO using 7Zip and copied them to the USB stick, it booted fine, up to the full GUI.


I realised that this must be due the ISO standard that the Avira ISO file was made with and an interesting discussion evolved on my favourite boot forum reboot.pro (see here).

It turns out that we just can't trust the Windows CD filesystem as it does not support the RockRidge enhancements used by *nix OS's. This means that utilities like ImDisk and SlySoft Virtual CloneDrive may shows filenames as all uppercase if a non-Joliet (i.e. RockRidge only) ISO is mounted under Windows.

Windows 8 supports the mounting of ISO files natively, no utility is needed - but it still does not support RockRidge! (come on MS - this is 2012!).

The moral of this story is, if you are extracting files from a linux ISO file, don't use a virtual drive to mount the ISO because the filenames 'case' cannot be trusted - instead use an extraction utility like 7Zip which will detect that the ISO is a RockRidge ISO and use the correct case for the files and folders.

Wednesday 10 October 2012

v2.1.650 new feature for multi-partition flash drives

If you have a flash drive with more than one primary partition on it, then Windows Explorer will only allow access to the first partition defined in the partition table. The new option allows you to re-order the table so that any one of the four primary partitions will be instantly accessible under Windows.
To create a multi-partition USB flash drive, I recommend the free Easeus Partition Master Home Edition.
RMPrepUSB version2.1.650 now has a new option in the Drive menu tab which allows you to make any one of 4 primary partitions on a USB or removable media drive visible to Windows. You do not need to remove the USB drive - the change is instant. So now you can quickly change the contents on each partition using Windows Explorer.

Sunday 26 August 2012

Was YLMF now StartOS

Tutorial 17 has been updated for the latest version of YLMF which is now called StartOS.
This is a Vista-like liveCD/installer but starts up in Chinese. I have added some cheat codes to get it to start in English. Take a look here.


Monday 13 August 2012

Windows 8 To Go

I seem to be getting a lot of hits on the Windows8ToGo page on my site, so I have added a YouTube video to help people to get started. Using JFX's tool, you can now directly download and extract the essential WAIK tools in about 30 seconds, rather than have to download the entire 1GB WAIK and then install it!

Friday 3 August 2012

First attempts at Raspberry Pi

I finally got my RPi a few weeks ago but have not had the time to play with it until now.
The first mistake I made was trying to power it from one of it's two standard USB ports (as I did not have a mini-USB power adapter at the time). This appeared to work, in that the RPi powered up and gave some video on the HDMI connection. However, the RPi kept crashing and rebooting and the USB keyboard did not work.
I was getting very frustrated until I tried a new mini USB charger (ordered from Amazon) - now it works well and does not crash.
Next, I tried Debian Wheezy, but I found it very slow - even for gmail browsing, and I could not find any instructions that worked to get YouTube working.
Finally, I tried an XBMC build from http://wordpress.silenz.se/ and then found a guide on how to install BBC iPlayer and other TV add-ins. I also found that a TVCatchup add-in is also available, so I can watch Live UK TV as well! Picture quality varies and there is some buffering delay on occasion even though I have a direct Enet connection.
It is ironic that TVCatchUp plays live TV, whereas as BBC iPlayer and other TV players play recorded TV!
My next step is to get a WiFi dongle working and then an IR dongle for a remote mini-keyboard.


Sunday 8 July 2012

82 - install XP from XP ISOs

This new tutorial shows you how you can place a number of different XP install ISO files on a grub4dos bootable USB drive and have multiple grub4dos menu items so that you can have a fully automated install without modifying the ISO - even if the ISO is a standard MS one.
The grub4dos menu allows you to specify a diskpart script so you can partition and format the drive however you want, an unattend.txt answer file so you can automate the install and change any settings you like, and a folder that will be copied over to the target C: drive during the install. This folder can contain all the drivers for a specific system, so you can use the same ISO to install a Dell PC or an Asus laptop and specify a different driver folder, diskpart script and answer file for each.

You can also have different answer files for different languages and timezones but use the same XP install ISO. This process will also work with nLited ISOs or XP install ISOs that are already semi-automated.
It uses WinPE v3 as the bootable OS and then runs diskpart and winnt32.exe to start the install. Only a single USB boot is required - the next boot is off of the hard disk.

Sunday 1 July 2012

81 - Make your own automatic image restore partition

If you want a hard disk backup partition which can be easily restored by a newbie, it can be done using imagex. This allows you to make a backup of the Windows volume and then restore it at a later date just by selecting it from a boot menu.
A full Windows XP restore on my laptop takes less than 2 minutes.
Checkout Tutorial #81 to set up your grandma's system with a 'reset' feature for when it all goes horribly wrong!

Saturday 16 June 2012

QEMU

Some people have reported that the QEMU button in RMPrepUSB does not run on their system. This may be because I am using the qemu-system-x86_64.exe version 0.15.1. The latest version of RMPrepUSB in the Beta Downloads section uses qemu.exe and may give better results.
So far, I have not been able to make any version of QEMU boot a WinPE 64-bit iso, which is rather disappointing...
If you are having trouble getting QEMU to run after trying this new version, please let me know and let me know what OS you are running, etc.
P.S. The most common problem is that you are assigning too much memory to QEMU, untick the 'No User prompts' checkbox and select a smaller size of memory when you run QEMU (e.g. choose 900 instead of 1300). If that still does not work and QEMU does not launch, reduce it even more.

Monday 30 April 2012

Latest version improves file access performance

v2.1.647 has a slightly modified filesystem tweak. This improves file access time for small files by about 10% when formatted as FAT32 or NTFS. See reboot.pro thread for more details. This makes file copying to your USB drive even faster!